Hollow Turning Hollow Vessel Hollow Form Hook Tool hooktool

turned vessel shear scraper turning tools sharpening jig stubby lathe s750

Ceramic Slipstone

Ceramic Slipstone: 


This is a hard to find, exceptional quality high tech ceramic material that will never wear out.  It is perfect for raising a burr on the shear scraper or honing your gouge and carving tools.  A must have!  5-1/2" long x 1/2" wide in a protective tube.

 
 

***************


You may place and pay for your order securely online with your credit card or paypal account.  A paypal account is not necessary for credit card payment. If you are more comfortable placing your order by phone, we welcome your call. - 615-941-1247


*Prices subject to change without notification

Shear Scraper Sharpening Instructions


Set a toolrest on the grinder so that you can touch up the bevel after raising the burr three or four times.  To raise a burr; rub the flat side to remove  the old burr and then stroke the slipstone along and up on the bevel side to raise a small burr. You will have to lift the stone off of the bevel and onto the edge a bit more each time you do it - that is why you regrind after three or four times.   I use a fine ceramic slipstone.